971, BLUE, 33M X 50MM

ASK A 3M EXPERT May, 2018 3M™ Ultra Durable Floor Marking Tape 971 Product Description 3M™ Ultra Durable Floor Marking Tape 971 is designed to withstand the scu ng from pallets and heavy equipment found in high tra c areas. Its unique adhesive provides a strong bond to the oor yet promotes one piece clean removal. The tape is ideal for 5S lean manufacturing initiatives. Product Features • 3M™ Ultra Durable Floor Marking Tape 971 is designed to withstand heavy tra c areas as well as scu ng from pallets and heavy equipment. • The unique adhesive provides a strong bond to most oors and excellent holding power yet provides clean one-piece removal from many surfaces. • Pigmented backings maintain their vivid colors even when exposed to heavy abrasion. • Easy release polypropylene liner for quick application. • Ideal for 5S lean manufacturing initiatives. 3M™ Ultra Durable Floor Marking Tape 971 Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for speci cation purposes. Typical Physical Properties Property Values Method Color Yellow, White, Red, Blue, Orange and Green Total Tape Thickness 0.84 mm Backing Polylactic Acid (PLA) Adhesive Rubber Liner Thickness 0.064 mm 33 mil ASTM D3652 2.5 mil ASTM D3652 Typical Performance Characteristics Property Values Method Substrate Stainless Steel Peel Adhesion 18.6 N/cm 170 oz/in ASTM D3330 Tensile Strength 175 N/cm 110 lb/in ASTM D3759 Elongation at Break 190 % Temperature Use Range 4 to 49 °C 40 to 120 °F Liner Release 14 g/cm 1.3 oz/in ASTM D3759 ASTM D3330 3M™ Ultra Durable Floor Marking Tape 971 Available Sizes Property Standard Roll Length Values 32.9 m 36 yd Handling/Application Information Application Techniques 1. After completing the surface preparation process 3M™ Ultra Durable Floor Marking Tape can then be applied to the surface of the intended application. Optimal adhesion is obtained when both the tape and intended surface are within a temperature range of 60° to 80°F (16° to 27°C). 2. When applying the tape in long straight lines a chalk line may be used as a guide line ( gure 1). 3. To apply the tape, remove a portion of the liner from one end of the tape and rmly tack it down to the oor. Gently pull liner away from tape at an angle as it is being applied by hand, following the chalk line ( gure 2). 4. Where joints are required, such as at corners and splices, a miter joint or butt joint is recommended (see gure 3 and gure 4). 5. Once the tape has been applied, a weighted roller, hand roller, or 3M™Hand Applicator PA1-B Blue is recommended to help fully adhere the adhesive of the tape to the application surface. 3M™ Ultra Durable Floor Marking Tape 971 Handling/Application Information (continued) Surface Preparation 1. Surfaces to be marked with 3M™ Ultra Durable Floor Marking Tape should be as clean, dry and smooth as possible. Floors may require cleaning to remove all traces of oils, grease, moisture, and any accumulation of waxes, coatings, nishes as well as dust, dirt and other grime. 2. Cleaning solutions should be chosen that do not leave residues or waxes on the surface to which the tape is to be applied. Always allow su cient time for thorough drying of the cleaning solution prior to application of the tape. 3. Freshly sealed surfaces, including, but not limited to, concrete, varnished or waxed oors should be allowed to dry thoroughly prior to application of the tape. Note: Be sure to follow manufacturer’s precautions and directions for use when using cleaning solutions or sealers. Wear appropriate personal protective equipment when sandblasting, scraping, sanding or grinding. Removal Techniques 1. To help minimize damage to the surface and to encourage clean removal it is recommended that the 3M™ Ultra Durable Floor Marking Tape be lifted gently at a corner then pulled up at a perpendicular angle. 2. If there is any adhesive residue, it may be softened by use of 3M™ Citrus Based Cleaner or many common solvents such as heptane, toluene or methyl ethyl ketone.* *Be sure to follow the manufacturer’s precautions and directions for use when using solvents. Prior to using any solvent to help remove adhesive residues, it is strongly recommended that the solvent be tested to determine compatibility in an inconspicuous location with the underlying surface nish. Storage and Shelf Life Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% relative humidity in the original packaging material.To obtain best performance, use 3M™ Ultra Durable Floor Marking Tape within 18 months from date of manufacture. 3M™ Ultra Durable Floor Marking Tape 971 Information Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills su cient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can a ect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a di erent warranty is speci cally stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product speci cation at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost pro ts or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability. Trademarks 3M is a trademark of 3M Company. 3M™ Ultra Durable Floor Marking Tape 971 References Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/? gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=971 ISO Statement This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. Industrial Adhesives and Tapes Division 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2020. All Rights Reserved. The brands listed above are trademarks of 3M